Services In Fume Treatment Plant WITH POLLUTION CONTROL EQUIPMENTS

POLLUTION CONTROL EQUIPMENTS : STATE OF THE ARTS TECHNOLOGY

* After exhaustive discussion and study determine the exact requirement of the equipments for Fume Treatment Plant (FTP)
* Design and Dimension the FTP System on the basis of exhaust gas conditions at the inlet point(Furnace Hood) and at the outlet point(Stack)
* Introduction in the system Water Cooled Duct, Combustion Chamber,Gas Coolers on the basis of the location of the plant
* Design the system on the basis of Bag House/ESP/Wet Scrubber as per the availability of water and power
* Dust level as low as 15mg/Nm3 of exhaust gases at the outlet of stack
* Online Monitoring equipment for continuous dust content monitoring
* Fume Treatment Plant Design from 0.1Million Nm3/Hr to 2Million Nm3/Hr.
* System is designed for the operating temperature of filter bags as 130deg.c and accordingly gas cooling equipments selected.
* Combustion Chamber for Close Hood Furnaces, for Safe oeration.

* After exhaustive discussion and study determine the exact requirement of the equipments for Fume Treatment Plant (FTP)
* Design and Dimension the FTP System on the basis of exhaust gas conditions at the inlet point(Furnace Hood) and at the outlet point(Stack)
* A combined FTP and De Dusting Plant for EAF(Primary) + EAF(Secondary, through Canopy) + LHF + MHS
* Complete Design/Dimensioning of Roof Elbow , Duct to Combustion chabme, Moving Sleeve, Combustion Chamber, Water Cooled Duct, Butterfly Valves(water cooled and non-cooled), Gas Cooler, Bag House , Stack.
* Design for combined Gas flow as high as 15,00,000(1.5 Million) Nm3/Hr
* Dust level as low as 15mg/Nm3 of exhaust gases at the outlet of stack
* Online Monitoring equipment for continuous dust content monitoring

* Understand and Evaluate efficacy of the existing plant and requirement of additional equipments to meet the Statutory requirement
* Addition of Secondary Fume Treatment System for the EAF
* Revamping of complete FTP System.